Chainsaw Tips

by Ollie Robinson Ollie Robinson No Comments

How to sharpen your chainsaw blade

A chainsaw is the most useful tool for a woodcutter or a carpenter. It is used for some very serious tasks such as cutting down any kind of a tall tree and also for the cutting of logs into small pieces. But, it is up to the user of the tool that how effectively he is able to use it for any kind of purpose. The prime part of a chainsaw is its blade which does the bulk of the work. However, things get really tough with the time when you are using the chainsaw, regularly but not looking after its blade. The blade with every project loses its sharpness and become dull.

So you can well imagine that how the performance of the equipment would deteriorate with time. This is nothing to worry about as there are some amazing tips and tricks which will help you with the sharpening of the blade in no time. The amateurs and as well as the professional users of the chainsaw must follow the right way of sharpening the chain blade. This guide will serve as the main point of reference for all types of chainsaw users in order to sharpen the blade of their tool.

Tips and tricks for sharpening the blade of the chainsaw

We have tried to devise very easy tips for the sharpening of the blade of the chainsaw so that everyone having any level of expertise with the equipment could benefit from this guide. The following are the tips that will help you in a considerable manner for the purpose of sharpening the blade of your chainsaw:

  • You need to first buy either a chainsaw file or a grindstone for the purpose of sharpening the blade. For this, you need to first of all determine the size of your tool.
  • Use oil and even detergents for cleaning the chain of the equipment as it becomes greasy and dirty with use.
  • You need to set up the saw very firmly on a stable surface. Be assured that the base is holding the tool tightly.
  • Find out the leading cutter of the chain as this is the point from where you need to start sharpening the tool. But, if you find all the teeth of the chainsaw of equal size, then you can begin from anywhere.
  • Then you need to hold the file at an angle of about 25 to 30 degrees with respect to the cutter which is grounded.
  • Now begin by sliding the file along the face of the cutter and give a slight bit of rotators or circular motion with your hand.
  • Make sure to maintain the same style of sharpening the chainsaw for each and every tooth of the blade, just as you have started.
  • Now begin the next cycle in the reverse direction just around the unfiled teeth to make it sure, that each of it has got it treatment.
  • Finally, just oil the chainsaw in order to counter the roughness before you begin using it again for any of your projects.

Sharpening the chainsaw is necessary to get your chainsaw prepared for better cutting work and a quick way to obtain the desired results. If your chainsaw gets blunt or the teeth of its saw become less sharp it may affect the performance and time taken to cut the trees. So, it would be better to keep an eye on this aspect and keep the tool updated for better use and easy cutting whenever you have to work with it.

by Ollie Robinson Ollie Robinson No Comments

5 common mistakes people make when using a chainsaw

The modern shape of the chainsaw is much more sophisticated which along with many benefits have raised a few concerns too. The majority of the amateur makes a lot of mistakes in using the equipment because of their less exposure to the tool. On the other side, there are a few advanced users too who also make some common mistakes which either affects their productivity level or on the other side, it raises a lot of serious injury related concerns. The best practice for users at any level is to master the use of the equipment and try to avoid all kinds of silly or major mistakes which they commit while using such a sophisticated tool for any productive reasons.

Our top 5 chainsaw mistakes

Unfortunately, there are a lot of common mistakes that people commit while they use a chainsaw. It may be because of the versatility of the tool and the options it provides, which makes them use it in a number of ways depending on the nature of the task. However, in the below list, we skimmed out the most common mistakes which most of the amateurs and even professional users of the chainsaw commits while using it for various purposes:

  1. A lot of people take the chainsaw related project very casually and they do not wear any safety equipment which eventually becomes very dangerous for them. You need to have sturdy boots, ear, eye and hand protection while dealing with such kind of equipment. It would be great if you put on safe and secure overall suit for better protection and also have covered your eye area. It is better to consider necessary precaution rather to get into danger or any harmful conditions during work.
  2. A safe environment is inevitable when you are dealing with large pieces of logs or cutting a tall tree. The premises or the nearby areas must be cleared from all the living beings and the valuables that you have. Unfortunately, there are some people who overlook this crucial aspect and then pay the ultimate price. It is always good, to take care of all aspects including the surroundings as well as the one you are working on.
  3. Some users don’t bother to check the equipment fully before they begin with their task with the help of using a chainsaw. This is a totally wrong approach as a mistimed tension of the chain of the equipment or the improper brake functionality can result in serious injuries and the productivity may also be altered.
  4. The fueling and oiling is another common mistake which several of the users of the chainsaw commit. Fueling and/ or oiling must be done or at least checked before using the tool every time. Another key point to keep in mind is that whenever you are fueling your chainsaw, so make sure that it is not hot. It means that the fueling must always be done before you begin with the real job.
  5. Several users of the equipment are unaware as how the equipment should be started in the most desirable manner. They try all sorts of techniques, but the right way always is to trigger it either on the ground or by holding it right in between your legs. Further, make sure that the brake of the chainsaw is engaged in either of the cases that you take on.

Mistakes are not at all safe for those who want to work with the chainsaw. It should be made clear that working with a chainsaw while you are cutting or felling trees, is a sensitive task and a slight mistake or ignorance can lead you to get yourself in danger and you may also get the chainsaw damaged. So, in case you are not fully prepared or have got plenty of training regarding the correct usage of the chainsaw, you should work with it under the supervision of an expert or at least should ask for important tips or tricks from an expert chainsaw user to make sure, you will be safe and secure and also can will work correctly, using the equipment.

by Ollie Robinson Ollie Robinson No Comments

Tips for becoming a chainsaw tree cutting pro!

A chainsaw is not a tool which could do the job without having any significant input from you. It is true that it is very powerful and versatile equipment, but still, the productivity of your any related project is ensured when you make the full use of the tool. The majority of the users today use it for the purpose of cutting the logs or for the trees. Both are serious tasks and require a lot of planning in order to make the most of the chainsaw tool. Here, we will be specifically talking about the usage of the chainsaw tool for cutting a tall tree which probably is rated as the most difficult job that you can ever do while using such a sophisticated equipment. The following section must be read from point to point by all the professional and amateur readers who are having issues with cutting down a tree using the chainsaw.

Tips for chopping down a tall tree using a chainsaw

There are many things related to your safety and the maintenance of the tool which must be ensured before you begin with any task. But for now, we will be concentrating primarily on the tree cutting tips with the use of a chainsaw which is given as follows:

  • Preparing the environment – The environment preparation means that the surrounding area where the tree would later fall should be cleared from everybody and all of your belongings. It is the first step which ensures human safety and also of the things that you possess. Using a ladder, the top of the tree must be tied to a rope which must be held up by one or two people in order to give it a balance once it leans towards its tilted direction.
  • Determine the direction in which the tree is tilted – This is where your planning starts and you devise out a strategy as to how you are going to cut the tree. Every tree in this world has a certain shape and almost all of them are tilted in some direction which is notable in most of the cases. Therefore, determine the direction in which the tree is tilted and then start by cutting a notch in that tilting direction.
  • Cutting against the notch from the other side – The first notch that you make shouldn’t be more than 25 percent of the total circumference of the tree. Once you accomplish this goal, then the next step is to cut again a notch from the other side which is towards the first notch that you created using the chainsaw. Once this second cut gets deepened, then the tree will start slightly to lean well away from you. And it’s the time the tree has got its final cut.
  • The tree finally fells – Once either the notches meet or they are near to meet, the tree falls down. Make sure that you or the other guys helping you in the project are well aware of the fall and they have taken all safety precautions in order to avoid any injury. It should be kept in mind that the whole area where the tree is going to feel down should be made clear of any human or living thing around it in order to avoid any accidents or loss.

It is just not an easy work to get a tall and huge tree down to the ground with just one blow. Rather, it’s a whole set of various steps that you will have to take before, during and after you have deployed your cutting tool. There should be a clear vision in front of you about how you will manage to cut the tree and what would be the best point where you will start cutting for better cutting and quick results. Determining the right direction and the right point to cut a tree is as important as it is to use the chainsaw in the correct manner. So it would be in your favor if you follow all necessary steps carefully so that the whole task gets completed quickly and easily without any problems.

by Ollie Robinson Ollie Robinson No Comments

What is Chainsaw kickback and how can you avoid it!

Chainsaw is a seriously productive tool for a number of tasks but at the same time, it can be lethal if mishandled or used without any precautions. The modern chainsaw products are equipped with a number of safety features. The safety in this domain is increasing rapidly with time. The safety features in some products are the de facto standards while some of the other types are the legal requirements in some particular jurisdiction. The users, however, are advised by the professionals and the manufacturers of the products to inspect the chainsaw in terms of its safety features before using it. The majority of the chainsaw safety features that you will find in a system are focused a lot more on the kickback problem. The intentions of the manufacturers in this regard are to either avoid the problem completely or to just reduce the risk of getting any injury.

What is Kickback?

In order to investigate deep into the kickback safety issues, we must first understand that what exactly kickback issue is. It is an issue which is primarily caused due to the cutting is done with the chain which is either on the bar or in the kickback zone. The bar nose kickback is the most common of all causes that can lead to serious kickback injuries. It is an issue which may occur when the chainsaw in its moving position at the tip or the nose of the bar touches with the object. In another scenario, it is caused, when the wood piece closes in approximation and it pinches the chain of the saw while making a cut. The bar nose or the tip in some of the scenarios can lead to a very rapid reverse action which kicks the bar up and back in the direction of the operator. How we can avoid this issue is discussed in the next section.

How to avoid kickback issues with a chainsaw?

The following is a concise list of points which will help any chainsaw user to reduce the chances of getting vulnerable to kickback injury:

  • If you are cutting anything with the tool then make sure to cut just one single piece at a time.
  • Make sure that the guide far nose of the tool doesn’t touch with the logs.
  • You must have an idea that is where exactly is the bar tip at all the time.
  • The chain tension should be maintained correctly. Because if the chain tension is not set in the correct manner and is overly pulled or loose, then it surely will cause the kickback or other issues as well. Which are not good for the user and also for the chainsaw.
  • The holding position of the chainsaw must be very accurate and with firmness in both the hands.
  • Your foot stance must also be firm and the body must be balanced properly too. You should be prepared for any sort of condition to make sure you can save yourself and still use the toll properly.
  • You must position yourself right at the side of the path where you are looking to make a cut.
  • The chain brake must be in its best working order and it is capable of stopping the equipment whenever desired
  • Follow the user manual of the product regarding the kickback safety features which is product specific and much more useful than the general advice.

Never think that you have got all conditions in your full control, rather you should prepare your chainsaw as well as your own body and mind to take care of any condition that may come through your way.

by Ollie Robinson Ollie Robinson No Comments

How to master the Chainsaw

Operating a chainsaw can be a very dangerous and sophisticated task in case you are not well prepared or trained. The previous statement is true for the amateurs who have issues not only with the learning of the tool, but also they are more vulnerable to injuries due to lack of practice with the equipment. Improper use of this equipment has historically hurt a lot of individuals and the injuries could be fatal if there is any kind of negligence shown while dealing with this kind of a tool. It is highly advised and recommended to all the amateur users that they must refrain from using the tool until they are well aware of all its techniques, potential hazards and the usability. In this guide, our sole aim is to literate all the amateurs users with all the potential hazards, techniques and the safety features related to the usage of the chainsaw. This will be a complete guide to help you master the usage of a chainsaw. This guide can also be helpful for experienced users who still don’t have all the information related to the usability of the chainsaw and other issues related to safety.

Steps you need to know for mastering a chainsaw

There can be a lot of steps to consider while dealing with a chainsaw but our sole intention here is to keep things short and simple so that users of all levels of expertise with the chainsaw could benefit with it. The below given is a list of well-researched steps which will help you with the mastering of a chainsaw:

  • Every chainsaw from any manufacturer comes with a user manual. It is an absolutely crucial document which will help you with product specific information so make sure you go throughout point to point.
  • Every model of the chainsaw is created for handling different tasks so make sure that you are using the appropriate chainsaw as per the requirements of the task that you are looking for.
  • Have a good look at and around the environment where you are going to work. Make sure that it is clear from all obstacles and there is no one around who is vulnerable to any sort of injury.
  • Make sure that you are well familiar with the cuts that you are going to make over the object. Determine that from what position you will start which usually is in the direction where the tree is tilted.
  • Make sure that your chainsaw is fuelled, oiled and in the best working condition. The chain of the saw must be sharpened and the tension should be aptly adjusted.
  • When your task has come to an end, then you must allow the chainsaw to come to a halt position before removing it from the tree log or otherwise the small flying objects could cause any kind of injury to the people in the surroundings.
  • Once everything is accomplished, then only store your chainsaw in its casing or in a cabinet when it has completely cooled down.

So, it should be very clear that using a chainsaw is not a magic and anyone who has a zest to learn and to excel in using such an innovative tool can do it for sure. Just focus on all safety aspects as well as the important functions and setting you to need to adjust and hold it in the right position, and you are all set to go. Though at the start you may think that it is not an easy task, with time you will get used to it.